催化裂化条件下噻吩与改性Y分子筛的作用机制

以HY、NiY和稀土离子改性的Y分子筛(REY)为研究对象,采用固定床装置评价噻吩模拟油催化裂化性能;运用气相色谱-氢火焰离子发光检测器(GC-FID)、气相色谱-硫化学发光检测器(GC-SCD)和原位红外光谱技术分析产物,关联分子筛的酸性,研究催化裂化条件下噻吩与改性Y分子筛的作用机制。实验结果表明,催化裂化条件下,噻吩与分子筛的作用机制差异主要取决于与B酸或L酸相关的非骨架铝物种或金属离子物种的存在形式。其中,NiY分子筛中,噻吩主要是吸附在与NiOH⁺物种相关的L酸中心,而Ni₄AlO₄³⁺等物种减弱B酸性中心从而降低其裂化性能。对HY来说,噻吩易在与AlO⁺等物种相邻的B酸中心上聚合形成三联噻吩,并发生一定的氢转移和裂化反应;而对REY而言,分子筛中与RE物种相关的L酸位会促进噻吩在与非骨架铝羟基等物种(如Al(OH)₂⁺、Al(OH)²⁺等)相邻的B酸中心形成的二联噻吩发生氢转移和裂化反应。     

Silver‐Assisted Chemical Etching on Silicon with Polyvinylpyrrolidone‐Mediated Formation of Silver Dendrites

Metal‐assisted chemical etching (MaCE) on silicon (Si)—mediated by polyvinylpyrrolidone (PVP)—is systematically investigated herein. It is found that the morphologies and crystallographic natures of the grown silver (Ag) dendrites can be significantly modulated, with the presence of PVP in the MaCE process leading to the formation of faceted Ag dendrites preferentially along the (111) crystallographic phase, rather than along the (200) phase. Further explorations of the PVP‐mediated effect on Si etching are also revealed. In contrast to the aligned Si nanowires formed by MaCE without PVP addition, only distributed nanopores with sizes of 200 to 400 nm appear on the Si surfaces in the presence of PVP. The origin of surface polishing on Si in the PVP‐mediated MaCE process can be attributed to the distinct transport pathway of holes supplied by the Ag⁺ ions, where the holes are injected directly into the primary Ag seeds, rather than through Ag dendrites, thus leading to the isotropic etching of the Si surface.     

Antioxidant activity and mechanism of the abietane-type diterpene ferruginol

The antioxidant activity of the abietane-type diterpene ferruginol was evaluated by comparison with that of carnosic acid, ( ± )-α-tocopherol and dibutylhydroxytoluene using 2,2-diphenyl-1-picrylhydrazyl, β-carotene bleaching and linoleic acid assays. Ferruginol had the lowest antioxidant activity of this group using the 2,2-diphenyl-1-picrylhydrazyl and β-carotene methods in polar solvent buffer. However, ferruginol exhibited stronger activity than carnosic acid and α-tocopherol for linoleic acid oxidation under non-solvent conditions. Five peaks corresponding to ferruginol derivatives were detected through GC-MS analysis of the reaction between ferruginol and methyl linoleate. The three reaction products were identified as dehydroferruginol, 7β-hydroxyferruginol and sugiol, and the other two peaks were assumed to be 7α-hydroxyferruginol and the quinone methide derivative of ferruginol. The time course of the reaction suggests that the quinone methide was produced early in the reaction and reacted further to produce dehydroferruginol, 7-hydroxyferruginol and sugiol. Thus, we inferred that quinone methide formation was a key step in the antioxidant reaction of ferruginol.     

计算化学在正丁醚制备实验教学中的应用*

正丁醚的制备是重要的大学有机化学实验,为提高学生对该实验所涉及的反应机理和关键操作要点的深入了解,采用Gaussian计算软件对正丁醇在酸催化下和无催化剂下的反应体系进行了研究,重点考察了酸催化下反应的主、副反应方向的反应机理。结果表明无催化剂下,正丁醇在常压液相下几乎不能发生反应;在酸催化下,正丁醇发生取代反应生成醚的反应路径是优势反应通道;酸催化下正丁醇的取代和消除反应速率常数均随温度增加而迅速增大,但消除反应的反应速率随温度增加更快,温度超过420 K消除反应将变得很明显,综合考虑,制备正丁醚的反应温度应控制在130~140 ℃之间较为合适。利用计算化学以图、表和动图等形式直观、动态、量化地解释了正丁醇成醚和成烯反应的竞争,该结果有助于更好地控制该反应体系,可用作实验教材的补充内容。     

金属草酸盐基负极材料——离子电池储能材料的新选择

商业化锂离子电池石墨负极和锂盐过渡金属氧化物正极材料的储锂容量都已接近各自的理论值,探索下一代高能量密度电极材料是解决现阶段锂离子电池容量限制的关键。近年来,新型金属草酸基负极材料,借助其在金属离子电池中多元化储能机制诱发的较高储能效应在碱金属离子电池绿色储能材料领域备受关注。本文就金属草酸基材料在锂、钠、钾金属离子电池方面的最新研究进行了综述,着重介绍了材料的晶型结构、多元化储能机制及储能过程中的动力学特征,简单阐述了材料在电化学储能中存在的问题,分析了金属草酸基负极材料在形貌晶型控制、界面碳复合改性和金属元素掺杂方面的改性策略。最后,预测了金属草酸基负极材料在碱金属离子电池体系的发展方向。     

基于生物炭的高级氧化技术降解水中有机污染物

碳基材料催化剂因具有良好的催化性能,同时可避免金属催化剂的重金属沥出造成的二次污染问题,常被应用于高级氧化领域。其中,以废弃生物质为原材料热解产生的生物炭,不仅具有催化潜力,还具有低成本和绿色环保等优势,被广泛用于活化过氧化氢、过一硫酸氢盐和过二硫酸盐等过氧化物降解水中有机污染物。本文介绍了生物炭的前体种类和制备方法、阐述了二者对生物炭活化能力的影响,总结了生物炭活化过氧化物的机理,分析了水质对降解污染物的影响,综述了生物炭的改性、循环使用及再生,指出了这一技术存在的问题并对后续研究进行了展望。     

Revealing the Cell Entry Dynamic Mechanism of Single Rabies Virus Particle

The rabies virus is a neurotropic virus that causes fatal diseases in humans and animals. Although studying the interactions between a single rabies virus and the cell membrane is necessary for understanding the pathogenesis, the internalization dynamic mechanism of single rabies virus in living cells remains largely elusive. Here, we utilized a novel force tracing technique based on atomic force microscopy(AFM) to record the process of single viral entry into host cell. We revealed that the force of the rabies virus internalization distributed at (65±25) pN, and the time was identified by two peaks with spacings of (237.2±59.1) and (790.3±134.4) ms with the corresponding speed of 0.12 and 0.04 μm/s, respectively. Our results provide insight into the effects of viral shape during the endocytosis process. This report will be meaningful for understanding the dynamic mechanism of rabies virus early infection.     

A Highly Sensitive and Selective Label-free Electrochemical Biosensor with a Wide Range of Applications for Bisphenol A Detection

A label-free DNA-based electrochemical biosensor owning high sensitivity and selectivity has been established for detecting bisphenol A in a wide range of applications. Coupling the high electrochemical performance of graphene oxide-thionine-Au nanomaterial with the specific binding capacity of the aptamers to BPA, the monitoring of trace amount of BPA was realized, the detection limit was 3.3 pg ⋅ mL⁻¹ with strong anti-interference. Besides, using molecular docking, it was found that BPA binds to the bases DC-49, DC-51, DG-52, DG-53 and DA-63 on the aptamer via hydrogen bonding and π-π stacking interactions. Finally, the biosensor had been successfully applied in different real samples.     

Soft microswimmers: Material capabilities and biomedical applications

In the last decades, microrobotics has attracted much attention of researchers due to the unique characteristics of shapes, propulsion mechanisms, and potential applications in the biomedical field. Recently, the research of microrobots has shifted to soft microrobots owing to their softness, elasticity and reconfigurability benefiting to interact with the complex channels in the human body compared to their rigid counterparts. There is significant progress on soft microswimmers and that encourages us to review this field timely to promote the development. In this review, we mainly highlight the progress of the soft microswimmers in recent years. The materials with softness, deformability and shape-morphing characteristics are surveyed as well as biocompatibility, followed by standard fabrication methods. Additionally, the locomotion based on self-propelled and external-field-driven mechanisms has been compared and discussed. Finally, the biomedical applications in imaging, targeted drug delivery and therapy, and microsurgery are highlighted followed by addressing the perspectives.